Eco leather

Eco leather

Eco leather

Eco-leather is a synthetic material made from polyurethane. It most often replicates the look of natural leather, providing a cheaper alternative. However, its properties allow for a wider range of possibilities, as eco-leather can look like e.g. canvas, rubber, rusty sheet metal or even the surface of stone. Eco-leather requires no special care and is easy to clean.

Eco leather banner
leather icon

How do you care for eco leather?

Using eco-leather accessories outdoors can weaken the structure of the material. Such factors as sunlight or air humidity affect its condition. It is good practice to periodically wipe the eco-leather products with a well-drained sponge (soapy water is sufficient) and then dry them thoroughly with a dry cloth. It is important not to use products containing oil, as this material does not have the same properties as natural leather, in extreme cases it may even damage the structure of the eco-leather.

. Eco-leather is particularly susceptible to very high temperatures, so avoid leaving accessories near barbecues or other heat-generating equipment. Any damage caused by high temperatures is irreversible and very visible. The same applies to low temperatures, which cause the material to harden and thus make it more susceptible to cracking. Accessories should be stored in darkened, dry places.

Methods for cleaning eco-leather

Important information

The rules described do not apply to applied logos, which are much more susceptible to dissolving and washing off, in the case of decorations such as hot stamping with coloured foil or printing. Such areas should not be cleaned, but only wiped very gently with a cotton cloth and clean water.

Eco leather info

Eco leather does not require the use of specialised cleaners, so in the case of hard-to-clean stains, more aggressive preparations can be used. Before use, make sure that the product does not contain corrosive substances. For everyday use, water, soap, dishwashing liquid and the same agents used for cleaning natural leather (excluding those based on oils and other fats) are sufficient. It is best to use cotton cloths and sponges for cleaning.

Variants are also available, such as:

Saffiano PU leather

Saffiano-textured eco-leather - a distinctive, finely checkered pattern designed in 1913 by Mario Prada. Warm to the touch. Does not discolour under embossing, giving the effect of a discreet logo.

. Material code: 113

Presidente PU leather

Eco-leather with a fine natural leather texture. Warm and leathery to the touch. Discolours under embossing, giving the effect of a clear, contrasting logo.

. Material code: 327

Stereo PU leather

Eco-leather with a texture reminiscent of old canvas. Warm to the touch. Discolours under embossing, giving the effect of a clear, contrasting logo.

. Material code: 321

Noble PU leather

Eco-leather with a fine natural leather texture. Warm and leathery to the touch. Does not discolour under embossing, giving the effect of a discreet logo.

. Material code: 322

Rust PU leather

Eco-leather with the texture of nubuck that has been polished by years of use. Warm and suede-like to the touch. Discolours under embossing, giving the effect of a clear, contrasting logo.

. Material code: 325

Stone PU leather

Eco-leather with the texture of finely woven canvas. Warm to the touch. Discolours under embossing, giving the effect of a clear, contrasting logo.

. Material code: 323

Dublin PU leather

Eco-leather with a fine natural leather texture. Leathery and cool to the touch. Discolours under embossing, giving the effect of a clear, contrasting logo.

. Material code: 320

Comodo PU leather

An eco-leather with a distinctive, varied, 'wild' texture. Leathery and cool to the touch. Discolours under embossing, giving the effect of a clear, contrasting logo.

. Material code: 328

Limoncello PU leather

Canvas-like eco-leather. Warm to the touch. Discolours under embossing, giving the effect of a clear, contrasting logo.

. Material code: 324

Havana PU leather

Eco-leather imitating a stone surface. Warm and nubby to the touch. Discolours under embossing, giving the effect of a clear, contrasting logo.

. Material code: 326

Lancaster PU leather

An eco-leather that looks like natural leather that has been used for years. Cool and leathery to the touch. It does not discolour under embossing, giving the effect of a discreet logo.

. Material code: 329

Eco leather Berlin

Classic eco-leather with a soft, natural texture. Warm and smooth to the touch. Does not discolour under embossing, giving the effect of a discreet logo.

. Material code: 119